Product Blog

[Insufficient Information] If you learn these points, you don’t need to spend money to find someone to fix the vacuum pump if it gets stuck!

manufacturer of vacuum pump filters

Let BTLAS now introduce some common causes of vacuum pump seizure and their corresponding remedies:

  1. Insufficient end face clearance can lead to a rise in the temperature of the vacuum pump, causing it to seize at critical points. In such cases, the rotor vanes should be ground and the clearance readjusted.
  2. Failure to timely replace the filter core in the vacuum pump filter allows contaminants such as metal shavings, small particles, and water vapor to enter the pump chamber, resulting in mechanical seizure. Regularly replacing the filter screen in BTLAS vacuum pump filters can significantly improve the efficiency of the vacuum pump and greatly extend its actual service life.
  3. Damage to the spring can cause uneven force distribution on the vanes, preventing them from functioning properly and leading to pump seizure. Timely replacement with a new spring and adjustment of the balance between the vane and the spring are necessary.
  4. Degradation or scaling of the pump oil, combined with the absence of a vacuum pump filter at the intake port, can allow gases to ingress and result in oil emulsification. It’s essential to promptly clean the emulsified oil within the pump and replace the air-water separator.
  5. Excessive tightness in the connection between the shaft and the shaft sleeve can also contribute to issues. In this situation, adding the appropriate amount of lubricating oil and manually rotating the vacuum pump rotor can ensure even distribution of the lubricant.

The above-mentioned troubleshooting methods have been shared by BTLAS. By keeping an eye on BTLAS, the manufacturer of vacuum pump filters, you’ll find more authentic and practical tips about vacuum pumps.

Related Posts

Leave a Reply